English – 34
Code Cause Corrective measures
Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
531 Configuration error Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
540 Temperature error The eBike is outside of the permissible
temperature range. Switch off the eBike
system and allow the drive unit to either
cool down or heat up to the permissible
temperature range. Restart the system.
If the problem persists, contact your
Bosch eBike dealer.
550 An impermissible load
has been detected.
Remove the load. Restart the system. If
the problem persists, contact your
Bosch eBike dealer.
580 Software version error Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
591 Authentication error Switch off the eBike system. Remove
the battery pack and reinsert it. Restart
the system. If the problem persists,
contact your Bosch eBike dealer.
592 Incompatible component Use a compatible display. If the problem
persists, contact your Bosch eBike
dealer.
593 Configuration error Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
595,
596
Communication error Check the wiring to the drive and restart
the system. If the problem persists,
contact your Bosch eBike dealer.
602 Internal battery fault Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
603 Internal battery fault Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
605 Battery temperature er-
ror
The battery is outside of the permissible
temperature range. Switch off the eBike
Bosch eBike Systems 1 270 020 Ken | (25.08.2020)
To Next Page
Loading...
