English – 35
Code Cause Corrective measures
system and allow the battery to either
cool down or heat up to the permissible
temperature range. Restart the system.
If the problem persists, contact your
Bosch eBike dealer.
606 External battery fault Check the wiring. Restart the system. If
the problem persists, contact your
Bosch eBike dealer.
610 Battery voltage error Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
620 Charger fault Replace the charger. Contact your
Bosch eBike dealer.
640 Internal battery fault Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
655 Multiple battery faults Switch off the eBike system. Remove
the battery pack and reinsert it. Restart
the system. If the problem persists,
contact your Bosch eBike dealer.
656 Software version error Contact your Bosch eBike dealer so that
they can perform a
software update.
7xx Error relating to third-
party components
Observe the information in the operat-
ing instructions of the respective com-
ponent manufacturer.
800 Internal ABS fault Contact your Bosch eBike dealer.
810 Implausible signals from
the wheel speed sensor
Contact your Bosch eBike dealer.
820 Fault in the wire to the
front wheel speed sensor
Contact your Bosch eBike dealer.
821 to
826
Implausible signals from
the front wheel speed
sensor
Restart the system and carry out a test
ride lasting at least two minutes. The
ABS indicator light must go out. If the
problem persists, contact your Bosch
eBike dealer.
Bosch eBike Systems 1 270 020 Ken | (25.08.2020)
To Next Page
Loading...
