English – 36
Code Cause Corrective measures
The sensor disc may be
missing, defective or fit-
ted incorrectly; there is a
significant difference in
diameter between the
front wheel and the rear
wheel; extreme riding
situation, e.g. riding
solely on the rear wheel
830 Fault in the wire to the
rear wheel speed sensor
Contact your Bosch eBike dealer.
831
833 to
835
Implausible signals from
the rear wheel speed
sensor
The sensor disc may be
missing, defective or fit-
ted incorrectly; there is a
significant difference in
diameter between the
front wheel and the rear
wheel; extreme riding
situation, e.g. riding
solely on the rear wheel
Restart the system and carry out a test
ride lasting at least two minutes. The
ABS indicator light must go out. If the
problem persists, contact your Bosch
eBike dealer.
840 Internal ABS fault Contact your Bosch eBike dealer.
850 Internal ABS fault Contact your Bosch eBike dealer.
860,
861
Fault in the power supply Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
870,
871
880
883 to
885
Communication error Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
889 Internal ABS fault Contact your Bosch eBike dealer.
Bosch eBike Systems 1 270 020 Ken | (25.08.2020)
To Next Page
Loading...
