To Next PageTo Next PageHow to fix no network connection on Bosch MIC-9502 Security Camera?
If you have no network connection with your Bosch Security Camera, check all network connections and ensure that the maximum distance between any two Ethernet connections is 100 m (328 ft) or less. If you are behind a firewall, ensure that the Video Transmission mode is set to UDP.
Why Bosch IP Camera has no video?
If your Bosch IP Camera shows no video, first check that the main power to the power supply is switched on. If you're using 24VAC, ensure the voltage at the camera is between 21VAC and 30VAC. When using High PoE, verify that the lights on the midspan indicate correct operation, consulting the midspan manual if needed. Also, check if you can access a web page.
What to do if Bosch IP Camera has no network connection?
If your Bosch IP Camera has no network connection, check all network connections to ensure they are properly established. Confirm that the distance between any two Ethernet connections doesn't exceed 100 m (328 ft). If you're behind a firewall, ensure that the Video Transmission mode is set to UDP.
How to fix Bosch IP Camera reboots frequently?
If your Bosch IP Camera reboots frequently, it might have an improper network connection. Try testing the camera with another power supply. Also, check the Bosch website for a software update that might address the issue.
What to do if Bosch IP Camera moves when attempting to move other cameras?
If your Bosch IP Camera moves when you attempt to move other cameras, check that the camera’s IP address is properly set. If the camera’s IP address is not set, use Configuration Manager to confirm that two cameras do not have the same IP address. If they do, change the address of one of the cameras.
Why is Bosch IP Camera picture dark?
If the optical image from your Bosch IP Camera is dark, check that the Gain Control is set to High and that the Auto Iris Level is set to the appropriate level.
How to fix no camera control on Bosch IP Camera?
If you have no control over your Bosch IP Camera, ensure that the LAN cable has a secure and good connection. Try refreshing the browser and make sure the video is updated. You can also cycle the camera's power off and on, or reboot the computer. For further assistance, refer to Status Code 17 in Error Codes.
What to do if Bosch IP Camera does not operate at low temperatures?
If your Bosch IP Camera doesn't operate as expected after exposure to extreme low temperatures, allow the camera to warm up. If the camera still doesn't operate after warming up, reset it by typing “/reset” at the end of the camera's IP address in your web browser. For further assistance, refer to Status Code 7 in Error Codes.
How to fix weak contrast on Bosch IP Camera?
If the contrast on the screen of your Bosch IP Camera is too weak, adjust the contrast feature of the monitor. If the camera is exposed to strong light, change the camera position. You can also adjust the Optical or thermal camera picture settings for your scene as described in Picture Settings or Picture Settings Thermal in the User Manual.
Why is background too bright on Bosch IP Camera?
If the background is too bright to see the subject in your Bosch IP Camera's optical image, turn on backlight compensation.
General| Brand | Bosch |
|---|---|
| Model | MIC-9502 |
| Category | Security Camera |
| Language | English |
