What to do if Bosch MIC IP dynamic 7000 HD won't operate after exposure to low temperatures?
If your Bosch Security Camera does not operate as expected after exposure to extreme low temperatures, allow the camera to warm up. If the camera does not operate after a 60-minute warm-up period, reset the camera by typing “/reset” at the end of the IP address of the camera in your web browser.
Why does nothing appear on the screen of my Bosch MIC IP dynamic 7000 HD Security Camera?
If nothing appears on the screen of your Bosch Security Camera, check if the power cord and line connection between the camera and monitor are properly connected.
General| Sensor Type | CMOS |
|---|---|
| Lens Type | Varifocal |
| Digital Zoom | 12x |
| Minimum Illumination | 0.01 Lux |
| Low Light Performance | Yes |
| Video Compression | H.264, MJPEG |
| Frame Rate | up to 60 fps |
| Ingress Protection | IP66 |
| IK Rating | IK10 |
| Pan Range | 360° |
| Aperture | F1.6 |
| Day/Night | Yes |
| IR Range | 30 m |
| Network Interface | Ethernet (RJ-45) |
| Power Supply | PoE+ (IEEE 802.3at) |
| Operating Temperature | -40°C to +60°C |
To Next Page
