Bosch NDP-4502-Z12 - Day;Night Mode and Switchover

AUTODOME IP 4000i Installing a Camera Directly to an Indoor Wall | en 29
Bosch Security Systems Installation Manual 2017.08 | 1.0 | F.01U.xxx.xxx
M4
T25
T25
M5
4. Route the cables from the ceiling out of the side of the mounting plate with the crescent-
shaped cut-out.
5. Attach the metal mounting plate to the inside of the pendant interface plate mount with
the three (3) M4 screws. Orient the plate as indicated in the following figure.
3×
M4
T25
6. Attach the hook of the safety tether from the adapter to the bottom of the camera.