AUTODOME IP starlight 5100i IR Camera | en 35
Bosch Security Systems
User Manual
2023-01 | 1.2 |
If you select the Pattern “Auto,” the camera adjusts to the brightness or darkness of the
background scene of the video. In other words, the color of the Privacy mask is the most
prevalent of the three (Black, White, or Gray) in the background scene that the Privacy mask
covers.
Privacy mask
Select the number of the Privacy mask. A colored rectangle appears in the unlabeled video
preview window above the Set button.
Enabled
Select this check box to draw the mask for the corresponding Privacy mask zone.
Clear this check box to erase the mask for an individual Privacy mask zone.
Zoom threshold
Click this check box to select the current zoom position at which the mask will appear as the
camera zooms in or be hidden as the camera zooms out.
6.9 Lens Settings
Focus
Autofocus
Continuously adjusts the lens automatically to the correct focus for the sharpest picture.
– One Push (default; commonly called “Spot Focus”): activates the Auto Focus feature after
the camera stops moving. Once focused, Auto Focus is inactive until the camera is moved
again.
– Auto Focus: Auto Focus is always active.
– Manual: Auto Focus is inactive.
Focus priority range
Select the range of the focus priority of the camera: 10 cm, 3 m, 5 m, or 10 m.
Focus speed
Use the slider (from 1 to 8) to control how fast the Auto focus will readjust when the focus
becomes blurred.
IR focus correction
Optimizes the focus for IR lighting. Options are: On, Off (default).
Zoom
Maximum zoom speed
Controls the zoom speed.
Digital zoom
Digital zoom is a method of decreasing (narrowing) the apparent angle of view of a digital
video image. It is accomplished electronically, without any adjustment of the camera's optics,
and no optical resolution is gained in the process.
6.10 PTZ Settings
Auto pan speed
Continuously pans the camera at a speed between right and left limit settings. Type a value
between 1 and 60 (expressed in degrees), inclusive. The default setting is 30.
Inactivity
Selects the time period the dome must be not controlled until the inactivity event will be
executed.
– Off (default): camera remains on a current scene indefinitely.
– Pre-position 1: camera returns to Pre-position 1.
To Next Page
Loading...
