AUTODOME IP starlight 5100i IR Recording | en 45
Bosch Security Systems
User Manual
2023-01 | 1.2 |
2. Click the date you wish to delete.
3. Click OK. The item will be deleted from the table and the window will close.
4. The process must be repeated for deleting additional days.
Time periods
You can change the names of the recording profiles.
1. Click a profile and then the Rename button.
2. Enter your chosen name and then click the Rename button again.
Activating the Recording
After completing configuration you must activate the recording scheduler and start the
recording. Once recording is underway, the Recording Profiles and Recording Scheduler
pages are deactivated and the configuration cannot be modified.
You can stop the recording activity at any time and modify the settings.
1. Click the Start button to activate the recording scheduler.
2. Click the Stop button to deactivate the recording scheduler. Running recordings are
interrupted and the configuration can be changed.
Recording status
The graphic indicates the recording activity of the camera. You will see an animated graphic
while recording is taking place.
7.6 Recording Status
Details of the recording status are displayed here for information. These settings cannot be
changed.
7.7 Recording Statistics
Recording
Identifies the current recording profile (1 or 2).
Zoom
Identifies the current zoom factor of the camera (1x, 2x, 4x, or 8x).
Averaging period
Select the appropriate averaging period as a means of stabilizing the long term bit rate.
7.8 Image Posting
JPEG
Image size
Select the size of the JPEG images that are to be sent from the camera. JPEG resolution
corresponds to the highest setting from the two data streams.
Options are:
– 256 x 144
– 512 x 288
– 768 x 432
– 1280 x 720
– 1536 x 864
– 1920 x 1080
– 2560 x 1440
– Resource based
The default option is 256 x 144.
File name
Select how file names are created for the individual images that are transmitted.
To Next Page
Loading...
