English | 27
"Simple Mitre" Measurement
The "Simple mitre" measurement is used to calculate the cutting angle MTR
when two workpieces with the same mitre have to form any outer angle x°
smaller than 180° (e.g. for skirting boards, banister columns or picture
frames).
When workpieces are to be fitted into a corner (e.g. for skirting boards),
measure the corner angle x° by positioning the fold-out leg and the base leg.
For given angles (e.g. picture frames), open the fold-out leg and the base leg
until the required angle is indicated in the display.
Bosch Power Tools 1 609 92A 56P | (12.07.2019)
To Next Page
Loading...
