Bosch PC600 - Safety Instructions and Reading Help; Standard Operation

Safety instructions and reading help
V
1070 072 144 -101
Safety instructions and reading help
Read this instruction manual before comissioning the digital input and out
put modules. Keep this manual in a place where it is always accessible to all
users.
Standard operation
This instruction manual contains all of the information required for standard
operation of the described products. The products described serve as digi
tal input and output modules for a Bosch PLC.
The products described were developed, manufactured, tested and do
cumented in accordance with the relevant safety standards. There should
be no risk of danger to personnel or property if the specifications and safety
instructions relating to the project phase and installation and correct oper
ation of the product are followed.
Qualified personnel
This instruction manual is designed for specially trained PLC personnel.
The relevant requirements are based on the job specifications as described
by the ZVEI, see:
Anforderungsprofile für SPSFachkräfte
I + K SPEKTRUM 19
Hrsg.: ZVEI
Stresemannallee 19
60596 Frankfurt
Federal Republic of Germany
ISSN 0932-5018
This instruction manual is designed for PLC technicians. Specialist knowl
edge of the Bosch PLC is required.
Interventions in the hardware and software of our products which are not
described in this instruction manual may only be performed by our skilled
personnel.
Unqualified interventions in the hardware or software or noncompliance
with the warnings listed in this instruction manual or indicated on the prod
uct may result in serious personal injury or damage to property.