To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GCM 350-254 and is the answer not in the manual?
General| Type | Mitre saw |
|---|---|
| Blade Diameter | 254 mm |
| Bore Diameter | 30 mm |
| Saw Blade Bore | 30 mm |
| Max. Cutting Width at 90° | 305 mm |
| Max. Cutting Width at 45° | 215 mm |
| Bevel Setting | 0 - 47° |
| Bevel Angle Range | 0 - 47° |
Read all safety warnings, instructions, illustrations and specifications provided with this power tool.
Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not force the power tool. Use the correct power tool for your application.
Mitre saws are intended to cut wood or wood-like products; they cannot be used with abrasive cut-off wheels.
Procedure for safely removing the saw blade using the hex socket screw.
Procedure for safely fitting a new saw blade using the hex socket screw.
Instructions for fitting the saw blade using the SDS bolt, with safety notes.
Steps to release the transport safety lock and guide the tool arm upwards.
Steps to securely lock the tool arm in the transport position.
Instructions for checking and adjusting mitre angle settings for precise cuts.
Instructions for checking and adjusting bevel angle settings for precise cuts.
