To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GLM 50-27 CG and is the answer not in the manual?
General| Measurement Range | 0.05 – 50.00 m |
|---|---|
| Accuracy | ±1.5 mm |
| Laser Class | 2 |
| Bluetooth | Yes |
| Protection Rating | IP65 |
| Weight | 0.2 kg |
| Laser Diode | 635 nm, < 1mW |
| Measuring Range of Inclination Measurement | 0 – 360° (4 x 90°) |
| Measuring Accuracy (Inclination) | ±0.2° |
| Measuring Time, Typical | < 0.5 s |
| Measuring Time, Max. | 4 s |
| Automatic Deactivation | 5 min |
| Memory Capacity | 30 measurements |
| Tripod Thread | 1/4" |
| Data Transfer | Bluetooth |
| Laser Type | Class 2, 635 nm |
| Automatic Calculation | Yes |
| Memory Function | Yes |
| Operating Temperature | -10 – 45°C |
| Storage Temperature | -20 – 70°C |
| Dimensions | 119 x 53 x 29 mm |
| Display | Color |
| Power Supply | 2 x 1.5 V LR6 (AA) batteries |
| Units of Measurement | ft |
| Display Type | LCD with backlight |
All instructions must be read and observed for safe operation. Safeguards may be compromised if not followed. SAVE THESE INSTRUCTIONS.
The measuring tool is intended for measuring distances, lengths, heights, clearances and inclines, and for calculating areas and volumes. Suitable for indoor use.
The numbering of the product features shown refers to the illustration of the measuring tool on the graphics page. Lists buttons and eyelets.
Details the meaning of various icons and indicators shown on the device's display, such as connection status and battery level.
Lists article number and technical specifications for the GLM 50-27 CG digital laser measure.
Details measuring range, accuracy, and smallest display unit for direct distance measurements.
Provides measuring range for indirect distance and level measurements.
Details measuring range and accuracy for grade (slope/incline) measurements.
Covers operating temperature, storage, humidity, altitude, pollution degree, laser class, and divergence.
Specifies the protection rating (IP 65) against dust and water jets.
Indicates the type and quantity of batteries required (2 x 1.5 V LR6 (AA)).
Specifies the available units for measurement settings (m, ft, in).
Details Bluetooth® version, frequency band, transmission power, and how to transmit data to other devices.
Details the process of inserting and changing batteries, including polarity and battery saver mode indications.
Provides essential advice for starting up the measuring tool safely, including protection from elements and handling.
Instructions on how to switch the measuring tool on and off, with and without the laser beam active.
Explains how to select one of three reference levels (rear edge, front edge, tripod thread) for accurate measurements.
Describes how to access and navigate the 'Settings' menu to adjust various device parameters.
Configure audible sound feedback and vibration alerts for measurements and errors.
Manage display illumination and activate battery saver mode to optimize power consumption.
Set preferred units of measurement and device display language.
Access PRO360 program details and view device serial number and software version.
Describes how to access the help function for detailed procedures of selected measuring functions.
Instructions on how to perform basic length measurements using the laser beam.
Details how to perform continuous measurements, including Min/max, Large numbers, and Tape measure modes.
Instructions for measuring the area of a space by taking width and length measurements.
Instructions for measuring the volume of a space by taking width, length, and depth measurements.
Explains the purpose and application of indirect distance measurements for challenging scenarios.
Step-by-step guide for measuring height indirectly using angles and distances.
Instructions for measuring distances in the vertical plane using two indirect measurements.
Details how to measure length indirectly by tilting the tool at a reference level.
Explains how to measure the total area of multiple walls with a common height.
Describes the stake out function for repeatedly measuring and marking defined lengths.
Explains how to retrieve and view stored measurement values and end results.
Provides instructions for deleting individual memory values or the entire memory content.
Details how to add or subtract measurement values, including area and length calculations.
Instructions on how to delete the last measured value or values in reverse order.
General tips for measuring, including not covering the reception lens or laser output and placing the tool on a firm surface.
Discusses factors affecting measuring range and accuracy, such as lighting, surface types, and diagonal measurements.
Details how to check and calibrate the accuracy of grade measurements.
Provides a step-by-step guide to check the accuracy of distance measurements.
Guidance on using accessories like tripods for stability and belt clips for portability.
Explains error messages and what to do if a defect is detected, including tool self-shutdown.
Instructions for cleaning and maintaining the measuring tool, including care for the reception lens.
Information on contacting Bosch for after-sales service, repairs, spare parts, and product advice.
