Balanced cabling
The following illustration shows the balanced cabling of an audio input (or output) on the
device.
Figure 6.3: Balanced cabling
RJ-45
The pin assignment of the LINE OUT 1-4 audio output sockets allows to connect the controller
to the RJ-45 audio input socket of the PAVIRO power amplifier using standard RJ-45 patch
cables.
Figure 6.4: Pin assignment of the LINE OUT 1-4 socket
Loudspeaker outputs
The audio outputs on the device allow to connect 100 V (or 70 V) loudspeaker zones. The
delivery includes 12-pin connectors. Conductor cross-sections of 0.14 mm² (AWG26) to
1.5 mm² (AWG16) can be used.
Recommended connecting cable: flexible CU strand, LiY, 0.75 mm².
6.2.2
22 en | Connection PAVIRO Controller
08-May-2017 | 04 | F01U306900 Operation manual
To Next Page
Loading...
