Front
Number Symbol Element Description
1 Zone status indicator light Indicates the status of the zone:
– Green = Zone is in use for non-
emergency purpose
– Yellow = Zone fault detected (Note:
The indication of this status has the
highest priority)
– Red = Zone is in use for emergency
purpose
– Off = Zone in idle condition
2 Combined fault warning
indicator light
This indicator lights yellow if a fault in
the system is detected. The indicator is
coupled with the READY contact (see
section Ready relay, page 28) on the
rear of the device, which allows any
faulty system behavior to be reported
externally.
Note: The fault types to be indicated via
this indicator can be configured.
3.2
PAVIRO Controller System overview | en 13
Operation manual 08-May-2017 | 04 | F01U306900
To Next Page
Loading...
