Bosch Rexroth A10VG - Page 4

4/64
Bosch Rexroth AG, Series 10 A10VG, RE 92750-01-B/06.2018
7.4.8 Changing the lever position of the HW control 39
7.4.9 Changing the lever position of the DA control valve (size 28 to 63) 39
7.4.10 Hydraulically connecting the axial piston unit 40
7.4.11 Electrically connecting the axial piston unit 45
7.5 Performing flushing cycle 46
8 Commissioning 47
8.1 Initial commissioning 47
8.1.1 Filling the axial piston unit 48
8.1.2 Testing the hydraulic fluid supply 49
8.1.3 Performing a functional test 49
8.2 Running-in phase 50
8.3 Recommissioning after standstill 50
9 Operation 51
10 Maintenance and repair 51
10.1 Cleaning and care 51
10.2 Inspection 52
10.3 Maintenance 52
10.4 Repair 53
10.5 Spare parts 53
11 Removal and replacement 54
11.1 Required tools 54
11.2 Preparing for removal 54
11.3 Removal 54
11.4 Preparing components for storage or further use 54
12 Disposal 55
13 Extension and conversion 55
14 Troubleshooting 56
14.1 How to proceed for troubleshooting 56
14.2 Malfunction table 57
15 Technical data 61
16 Alphabetical index 62
Contents