About this documentation 5/64
RE 92750-01-B/06.2018, A10VG, Series 10, Bosch Rexroth AG
1 About this documentation
1.1 Applicability
This documentation applies to the following products:
• Axial piston variable pump A10VG Series 10
This documentation is intended for machine/system manufacturers, assemblers and
service engineers.
It contains important information on the safe and appropriate transport, installation,
commissioning, operation, maintenance, removal and simple troubleshooting of the
axial piston unit.
▶ Read this documentation completely, in particular chapter 2 “Safety instructions”
on page 9 and chapter 3 “General notices regarding property and product
damage” on page 16 before you start work with the axial piston unit.
1.2 Required and supplementary documentation
▶ Only commission the axial piston unit if the documentation marked with the book
symbol
is available to you and you have understood and observed it.
Table 1: Required and supplementary documentation
Title Document number Document type
Order confirmation
Contains the order-related technical data for your axial piston variable pump
A10VG.
– Order confirmation
Installation drawing
Contains the outer dimensions, all ports and the hydraulic circuit diagram for your
axial piston variable pump A10VG.
Please request the
installation drawing
from your contact
at Bosch Rexroth.
Installation drawing
Axial piston variable pump A10VG
Contains the permissible technical data.
92750 Data sheet
Mineral oil-based hydraulicfluids and related hydrocarbons
Describes the requirements on a mineral oil-basedhydraulic fluid and related
hydrocarbons for operation with Rexroth hydraulic components and assists you in
selecting a hydraulic fluid for your hydraulic system.
90220 Data sheet
Environmentally acceptable hydraulic fluids
Describes the requirements on an environmentally acceptable hydraulic fluid
for operation with Rexroth hydraulic components and assists you in selecting a
hydraulic fluid for your hydraulic system.
90221 Data sheet
Fire-resistant, water-free hydraulic fluids (HFDR/HFDU)
Describes the requirements on fire-resistant, anhydrous hydraulic fluids (HFDR/
HFDU) for operation with Rexroth hydraulic components and assists you in
selecting a hydraulic fluid for your hydraulic system.
90222 Data sheet
Axial piston units for operation with fire-resistant hydraulic fluids – anhydrous,
hydrous (HFDR, HFDU, HFA, HFB, HFC)
Describes the requirements on fire-resistant, anhydrous and hydrous hydraulic
fluids (HFDR, HFDU, HFA, HFB, HFC) and contains the technical data for operation
with Rexroth hydraulic components.
90225 Data sheet
Component class: 92003-CC-0011_ETPump
The component class specification explains what data is available, how this data
was obtained, and what else should be observed.
92003-CC-0011_
ETPump
Component class
specification
BODAS-drive eDA application software
BODAS-drive eDA is a software solution integrated in the Rexroth SRC-eDA1/31
control unit for controlling the hydrostatic drive train in wheeled vehicles.
95315 Data sheet
To Next Page
Loading...
