Bosch rexroth A15VO - Transport and Storage; Transporting the Axial Piston Unit; Transport by Hand

22/64 Transportand storage
Bosch Rexroth AG, A15V(L)O Series 11, RE 92511-01-B/2019-10-09
6 Transportand storage
▶ Always observe the necessary ambient conditions for transportand storage;
seechapter 6.2 "Storing the axial piston unit" on page 25.
Information on unpacking can be found in chapter 7.1 "Unpacking" on page 27.
6.1 Transporting the axial piston unit
The following transportation options are available depending on weight and duration
of transport:
• Transportby hand
• Transporting with a lifting device (eye bolt or lifting strap)
Table 6: Dimensions and weights (without through drive) A15VO
Size 110 145 175 210 280
Weight kg 64 79 97 111 143
Width mm Dimensions vary by equipment. The values applicable for your axial piston
unit can be found in the installation drawing (request if necessary).
Height mm
Depth mm
Weight may vary by equipment.
Table 7: Dimensions and weights (without through drive) A15VLO
Size 145 175 210 280
Weight kg 92 110 125 148
Width mm Dimensions vary by equipment. The values applicable for your axial piston
unit can be found in the installation drawing (request if necessary).
Height mm
Depth mm
Weight may vary by equipment.
6.1.1 Transportby hand
Up to a specific maximum weight, axial piston units can be transported by hand for
a short distance. Observe the national regulations in your country. To prevent health
damage, we recommend renouncing any transportby hand.
CAUTION! Risk of injury due to heavy loads!
Health hazard from carrying axial piston units.
▶ Only manually transportthe axial piston unit for a short period of time.
Observethe national regulations in your country for manual transport.
▶ Always use appropriate lifting, lowering and moving techniques.
▶ Use your personal protective equipment (e.g.safety goggles, safety gloves,
suitable working clothes, safety shoes).
▶ Do not transportthe axial piston unit by sensitive assembled parts (e.g.sensors
or valves).
▶ Carefully place the axial piston unit on the seating to prevent it from being
damaged.
Dimensions and weights