CS351 | 3609929B45/2014-09 Bosch Rexroth AG 57/108
About This Document
ENGLISH
1 About This Document
This manual contains important information
on the safe and appropriate assembly,
transport, commissioning, operation, main-
tenance, disassembly and simple trouble-
shooting of the CS351/CC-CS351 Com-
pact System.
The description of the software used in the
Compact System is not a part of these in-
structions. For any information on software
and operation which you may require,
please see the online help of the operating
program for BS350 as well as the system
documentation on the enclosed USB sys-
tem stick.
Read these instructions completely, espe-
cially chapter “General safety instructions”
on page 58 before working with the Com-
pact System.
Scope of the documentation
This documentation is applicable for the
CS351 and CC-CS351 Compact Sys-
tems. Tightening operations requiring docu-
mentation according to VDI/VDE 2862 Cat-
egory A can be performed using tightening
systems which consist of the ErgoSpin
hand-held nutrunner and the CS351E...
Compact System. Tightening operations re-
quiring documentation according to VDI/
VDE 2862 Category B can be performed
using CC tightening systems which consist
of the CC-ErgoSpin hand-held nutrunner
and the CS351E... or CC-CS351E-D Com-
pact System.
The CS351... Compact System allows con-
necting the system to field buses.
Related documents
Please also observe the generally applica-
ble, legal or otherwise binding regulations
of European or national legislation and the
rules for the prevention of accidents and for
environmental protection applicable in your
country.
CS351_zweispaltig - D.book Seite 57 Donnerstag, 2. Oktober 2014 8:36 08
To Next Page
Loading...
