Bosch Rexroth H-4WEH...XE Series - 2 Safety instructions; 2.1 General Safety Information; 2.2 Intended Use and Improper Use

Safety instructions 9/52
RE24751-XE-B/10.19, H-4WEH...XE..., BoschRexrothAG
Abbreviation Meaning
IEC International Electrotechnical Commission
RE Rexroth document in English language
IP Ingress protection class of electric operating equipment
A, B Hydraulic connections (actuators)
T Hydraulic connection (tank)
P Hydraulic connection (pump)
X, Y Hydraulic connection (pilot oil)
ANSI American National Standards Institute
2 Safety instructions
2.1 General information on this chapter
The product has been manufactured accordingto the generally accepted codes of
practice. However, there is still a danger of personal injury and damage to property
ifyou do not observe this chapterand the safety instructions in this documentation.
▶ Read this documentation completely and thoroughly before working with the
product.
▶ Keep this documentation in a location where it is accessible to all users at
alltimes.
▶ Always include the required documentation when you pass the product on to
third parties.
2.2 Intended use
The product is a hydraulic component.
You may use the product as follows:
• as a pilot-operated valve with solenoid actuation for intended use in explosive
atmospheres.
The product is intended for professional use only; private use is excluded.
Intended use includes having read and understood this documentation completely,
especially chapter2 "Safety instructions".
The valve is designed and constructed for the control of oil flows. It complies with
the requirements of the ATEXDirective2014/34/EU.
Details about the device group, category, temperature class and equipment
protection level(EPL) in accordance with ATEXDirective 2014/34/EU and the
derived standards are provided in "Datasheet24751-XE" under "Information on
explosion protection" and on the name plate of the valve.