Bosch Rexroth Hagglunds VI 64 Series - Default Chapter; Preface

The data specied above only serve to describe
the product. No statements concerning a
certain condition or suitability for a certain
application can be derived from our informa-
tion. The information given does not release
the user from the obligation of own judgment
and verication. It must be remembered that
our products are subject to a natural process of
wear and aging.
© This document, as well as the data, specica-
tions and other information set forth in it, are
the exclusive property of Bosch Rexroth AG. It
may not be reproduced or given to third parties
without its consent.
Changes in the equipment may occur. We there-
fore reserve the right to introduce amendments
in the manual as we deem necessary without
notice or obligations.
This Installation and Maintenance Manual is val-
id for motor series 44, 64 and 84 manufactured
after 95-01-01. For older motors please contact
your nearest Bosch Rexroth representative.
The cover shows an example conguration. The
product supplied may therefore dier from the
gure shown.
The original operating instructions were pre-
pared in English.