Installation 39/68
Hägglunds VI, RE 15310-WA/10.2015, Intallation and maintenance manual, Bosch Rexroth Mellansel AB
High pressure operation
BCI M-30 – XXX (without ushing)
Plug removed
“D” plugged
Fig. 47:
Notice! Alternatively “D”-port can be used as main port, but then “A”-port must be
plugged. To assure good venting, choose the connection at the highest point as main
port.
Removal of the plug
Allen key
Fig. 48:
DANGER
Do not disassemble the brake cylinder without special tools.
To Next Page
Loading...
