In operation Storage / Transport
Air pressure Up to 2700 m above MSL accord‐
ing to DIN 60204
For
use exceeding 2700 m above
MSL, see chapter 8.3.8 "Use of
IndraControl L45/L65/L85 above
2700 m above MSL" on page
65.
Up to 3000 m above MSL accord‐
ing to DIN 60204
Mechanical
strength
Maximum vibration:
Frequency range: 10 to 150 Hz
Excursion: 0.075 mm
for 10 ... 57 Hz
Acceleration: 1 g
for 57 to 150 Hz
acc. to EN 60068-2-6
Maximum shock:
15 g according to EN 60
068-2-27,
no disturbance of the function
Fig.4-3: Ambient Conditions
The surrounding air must be free from acids, alkaline solutions,
corrosive agents, salts, metal vapors, and other electrically con‐
ductive contaminants in high concentrations.
The ambient air must be dust-free. Housings and installation com‐
partments must at least comply with degree of protection IP 54
according to DIN VDE 0470-1.
Danger of destruction by overheating
NOTICE
Ensure a surrounding air temperature of less than 45 ℃.
Operation is allowed up to 55 ℃ and if the air recirculates. If applicable, a fan
must be used, see chapter "Fan" on page 72.
If the internal temperature reaches approx. 80 ℃, the control switches off au‐
tomatically.
If the internal temperature is 70 ℃ or higher, the display indicates the warning
"Temp !!!".
The user program can read the internal temperature of the IndraControl L45/
L65/L85 using the "IH_Temperature" functions in the RIH_HWTestLib library in
order to trigger further reactions.
For IndraControl L85 a fan must be used.
A fan is included in the scope of delivery of the IndraControl L85.
4.4 Used Standards
The IndraControl L45/L65/L85
complies with the following standards:
Standard
Meaning
DIN EN 60 204-1 Electrical equipment of machines
DIN EN 61 131-2 Programmable logic controllers
Equipment and tests requirements
DOK-CONTRL-ICL45L65L85-PR01-EN-P
Rexroth IndraControl L45/L65/L85 Control
Bosch Rexroth AG 21/81
Technical Data
To Next Page
Loading...
