1 System presentation
1.1 Introduction
1.1.1 IndraDrive Mi
IndraDrive Mi is an innovative system solution within the Rexroth IndraDrive
platform with
● KSM02 motor-integrated servo drives
⇒ Synchronous servo motors (on the basis of Rexroth IndraDyn S) with
integrated inverters and control sections
● KMS02 and KMS03 near motor servo drives
⇒ Very compact inverters with control sections
● KCU02 drive connection box
⇒ Component used to connect the servo drives to HMV supply units or
HCS converters
● KMV03 supply unit
⇒ Component used to supply servo drives
● KNK03 mains filter (with integrated mains choke)
⇒ Mains connection component for KMV03 supply units
● KLC03 DC bus capacitor unit
⇒ Component used to buffer the DC bus voltage
Components of the IndraDrive Mi product range allow a drive system to be
designed without a control cabinet.
Supplying the drives with HMV supply units or HCS drive controllers requires
a control cabinet.
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
1/407
System presentation
R911335703_Edition 04 Bosch Rexroth AG
To Next Page
Loading...
