EasyManua.ls Logo

Bosch Rexroth PSI 6500 Series - Installation and Assembly

Bosch Rexroth PSI 6500 Series
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-6 Electric Drives
and Controls
Bosch Rexroth AG PSI 6500.xxx 1070087059 / 02
Safety Instructions
1.5 Installation and Assembly
DANGEROUS ELECTRICAL VOLTAGE
Danger of life during installation work while systems are switched
on!
Make sure that all plant sections undergoing operations during
the installation are de-energized and sufficiently protected
against accidental reclosing!
DANGER
Non-workmanlike installation or mounting may lead to personal
injury or damage to property.
Therefore, it is essential that you take the technical data (environ-
mental conditions) into account for installation or mounting.
Installation or mounting must be carried out by skilled personnel
only.
DANGER
Danger of injury and of damage to property through incorrect in-
stallation!
Devices and, in particular, operating means, must be installed so
as to be properly safeguarded against unintentional operation or
contact.
DANGER
Danger of personal injury and damage to property through inade-
quate fastening!
The place for installing the modules, and their method of faste-
ning, must be suitable for their weight!
DANGER
Injuries and bruises may be caused by lifting weights which are
too heavy or by sharp metal edges!
Due to the heavy weight of individual modules several persons are
required for installation and assembly.
DANGER
The safety and accident prevention regulations as amended shall
be observed!
Wear a protective helmet, safety shoes and gloves!

Related product manuals