Electric Drives
and Controls
1-1Bosch Rexroth AGPSI 6500.xxx1070087059 / 02
Safety Instructions
1 Safety Instructions
The products described were developed, manufactured and tested in
compliance with the fundamental safety requirements of the EU machi-
nery directive. These products normally pose no danger to persons or
property if used in accordance with the handling stipulations and safety
notes prescribed for their configuration, mounting, and proper operation.
Nevertheless, there is some residual risk!
Therefore, you should read this manual before installing, connecting or
commissioning the products or programming the welding system.
Store this manual in a place to which all users have access at any time!
The content of this manual refers to
D the functionality and
D the specific electric connection
of a master-slave combination with PSI 6500.xxx.
You need the present manual as a supplement to the basic docu-
mentation of the product, if you intend the master-slave mode in
your application.
L Therefore, please pay attention to the following documentation as well:
D Control and I/O Level, Technical Information
for PSx 6xxx.100, PSx 6xxx.190 or PSx 6xxx.000
Control and I/O Level, Technical Information
D Medium-Frequency Inverter, Technical Information (1070 080 028)
for PSI 6500.xxx
1.1 Possible Safety Markings on the Product
Warning of dangerous electrical voltage!
Lug for connecting PE conductor only!
Function ground, ground with low parasitic voltage
Connection of shield conductor only
To Next Page
Loading...
