Electric Drives
and Controls
1-3Bosch Rexroth AGPSI 6500.xxx1070087059 / 02
Safety Instructions
1.3 Intended Use
The product described
D serves in connection with a welding transformer and the appropriate
power supply unit for
- resistance welding of metals
and
D is suitable for operation in industrial environments in accordance with
the following standards:
- EN 50178
- EN 50081-2
- EN 50082-2
- EN 60204-1
In residential environments, in trade and commerce as well as small
enterprises class A equipment may only be used if it does not inad-
missibly interfere with other equipment.
It is not intended for any other use!
DANGER
Any use other than for the purpose indicated may result in perso-
nal injury of the user or third parties or in damage to equipment,
the workpiece to be welded, or environmental damage.
Therefore, our products must never be used for any other than
their respective intended purpose!
. For operation in residential environments, in trade and commercial
applications and small enterprises, an individual permit of the na-
tional authority or test institution is required; in Germany, please
contact the Regulierungsbehörde für Telekommunikation und
Post (RegTP) or its local branch offices.
The faultless, safe functioning of the product requires proper transport,
storage, assembly and installation as well as careful operation.
To Next Page
Loading...
