RE 30139-B/12.14 | VT-HNC100...X Bosch Rexroth AG 23/48
Assembly
6.4 VT-HNC100...3X mechanical assembly
Assemble the VT-HNC100...3X on a top hat rail as follows:
f Carefully engage the rear wall of the VT-HNC100...3X housing on a top hat
rail and check for safe seat. The mechanical contact points on the elastic rear
wall of the VT-HNC100...3X allow for a safe seat on the top hat rail and the
connection of the housing with the control cabinet's earthing system.
Connect Press down Engage
Fig. 3: VT-HNC100...3X assembly on the top hat rail
Contact points
Top hat rail 35 mm
TH 35-7.5 or TH 35-15
according to EN 60715
Fig. 4: Contact points of the VT-HNC100...3X for assembly on top hat rail
By snapping the housing of the VT-HNC100...3X/ on a conductive assembly
rail, the earth connection to the control cabinet rear wall is established. This
constitutes the HF earthing of the VT-HNC100...3X.
To Next Page
Loading...
