42/48 Bosch Rexroth AG VT-HNC100...3X | RE 30139-B/12.14
Maintenance and repair
9 Maintenance and repair
9.1 Cleaning and care
NOTE
Failures!
Loss of functionality due to penetrating dirt and humidity!
f Always provide for absolute cleanness when working on the VT-HNC100...3X.
f Only use a dry and dust-free cloth for all cleaning works.
Aggressive detergents may damage the VT-HNC100...3X and let it age faster.
Never use solvents or aggressive detergents.
For cleaning and maintenance proceed as follows:
f Perform a visual inspection for checking the tight seat of all lines and screws.
f Check all plug-in and clamping connections of the VT-HNC100...3X for correct
seat and damage at least once per year.
f Check lines for breakage and squeezing. Have damaged or defective lines
exchanged immediately!
f Clean housing parts with a dry and dust-free cloth.
9.2 Maintenance
The maintenance of the VT-HNC100...3X is limited to the cleaning of the surface
in order to avoid that dirt and humidity will enter the housing. Regularly check the
VT-HNC100...3X for dirt and correct connections taking into account the ambient
conditions.
9.3 Repair
The VT-HNC100...3X can only be exchanged as whole unit. For safety reasons,
modifications at the VT-HNC100...3X performed to one's own authority are not
admissible! Repair and maintenance works may only be performed by Bosch
Rexroth AG. For repair and maintenance works, send the unit to the service
address specified in chapter 15.
Devices returned to Bosch Rexroth for repair must be sent in original packaging.
Repaired devices are returned with default settings.
User-specific settings are not accepted. The user must transfer all appropriate
user parameters and programs again.
To Next Page
Loading...
