6
|
Bosch Remote Controller for Split Type Ductless Air Conditioner / Heat Pump User Manual
12.2016 | Bosch Thermotechnology Corp.Data subject to change
3 Operation of buttons
MODE
FA
N
TE
MP
SLEEP
ON/OFF
SILE NCE
FP
TIMER
O
N
TIM
ER
OFF
1
2
4
3
8
9
7
5
6
10
12
11
13
14
SWING DIRECT
LE
D
FOLLO
W
ME
TU RBO SELF
CL
EAN
Figure 2
1. ON/OFF Button: Press this button to turn the air conditioner ON or OFF.
2. MODE Button: Press this button to select the air conditioner / heat pump's
mode of operation.
AUTO COOL DRY HEAT FAN
3. FAN Button: Press this button to select the fan speed.
AUTO LOW MED HIGH
You can not switch the fan speed in AUTO or DRY mode
4. SLEEP Button: Press this button to Activate/Disable the SLEEP function.
The SLEEP function can maintain the most comfortable temperature
while saving energy. This function is available in COOL, HEAT or AUTO
modes only.
For more information on the SLEEP function operation, please
reference the unit's USER MANUAL.
While the unit is running in SLEEP mode, it will be cancelled if the
MODE, FAN SPEED or ON/OFF button is pressed.
5. TURBO Button: Press this button to Activate/Disable the TURBO function.
TURBO function enables the unit to reach the preset temperature at cooling or
heating operation in the shortest time possible. The fan will run at a speed above
HIGH.
6. SELF CLEAN Button: Press this button to Activate/Disable the SELF CLEAN
function. Under SELF CLEAN mode, the air conditioner will automatically clean
and dry the evaporator and blower fan.
7. Temperature Control:
UP Button( ): Push this button to increase the indoor temperature setting in
1°F increments , limited to 86°F.
DOWN Button(): Push this button to decrease the indoor temperature setting
in 1°F increments, limited to 62°F.
Temperature contol is not available in Fan mode.
Press and hold the UP and DOWN buttons together for 3 seconds to
alternate the temperature display between the °C & °F scales.
To Next Page
Loading...
Need help?
General
