de programs
P6
rograms
programs
PH
rograms
Here you will find an overview of
If the rinse aid system is switched on or if
there is a lack of rinse aid, the running time
changes.
You can find the consumption values
in the quick guide. The consumption
values refer to normal conditions and
a water hardness value of 7 - 16 °dH.
Different influencing factors can lead
to deviations, e.g. B. Water
temperature or line pressure.
the adjustable programs. Depending
on the device configuration, various
programs are available, which you
can find on the control panel of your
device.
Depending on the program you choose,
the duration may vary. The running time
depends on the water temperature, the
amount of dishes, the degree of soiling
and the additional function selected →
Page 20
away. When off
program use Program Sequence
Dishes:
¡Pots, pans, insensitive
ches crockery and cutlery
Degree of soiling:
¡strongly sticking, burned-in,
Dried, starchy and protein-
containing leftover food
Intensive:
¡Pre-rinse
¡Clean 70°C ¡
Intermediate rinsing
¡Rinse 69 °C ¡dry
Intense 70°
Dishes:
¡mixed dishes and dishes
plug
Degree of pollution:
¡slightly dried, household
usual leftovers
Sensor-optimized:
¡Becomes dependent on
of pollution
of the rinse water
optimized by sensors
mingled.
Auto 45-65°
Dishes:
¡mixed dishes and dishes
plug
Degree of pollution:
¡slightly dried, household
usual leftovers
Most economical pro
gram:
¡Pre-rinse
¡Clean 50°C ¡
Intermediate rinsing
¡Rinse 68 °C ¡dry
Eco 50°
Dishes:
¡mixed dishes and dishes
plug
Degree of pollution:
¡slightly dried, household
usual leftovers
Time optimized:
¡Clean 65°C ¡
Intermediate rinsing
¡Rinse 69 °C ¡dry
Express 65° - 1h
Only use when the device has been
cleared out.
Machine care
70°C
Machine care
18
To Next Page
Loading...
