Transport, storage and disposalde
19.2 Make the device frost-
proof
19.4 Dispose of old device
Valuable raw materials can be
reused through environmentally
friendly disposal.
If the device is in a room at risk of
frost, e.g. B. in a holiday home, empty
the device completely.
▶ Empty the device.
→
"Transporting the device", page 51
WARNING
Risk of damage to health! Children can
become trapped in the device and
endanger their lives.
▶ For old devices, pull the power plug
of the power connection cable, then
cut the power connection cable and
destroy the lock on the device door
to such an extent that the device
door no longer closes.
19.3 Transporting the device
To avoid damage to the device,
empty the device before transport.
A notice:To ensure that no residual
water gets into the machine control and
causes damage to the device, only
transport the device upright.
1.Pull out the mains plug of the
mains connection cable.
1.Remove dishes from the
appliance.
2.Cut the mains connection cable.
2.Secure loose parts.
3.Switch on the device. →
Page 32
3.Dispose of the device in an environmentally friendly
manner.
4.Select the program with the
highest temperature.
→
"Programs", page 18
You can obtain information about
current disposal routes from your
specialist dealer or your local or city
administration.
5.Start the program. →
Page 33
6.To empty the device, cancel the
program after approx. 4 minutes.
→
"Cancel program", page
33
This device complies with
European standards
Directive 2012/19/EU
about old electrical and
electronic devices (waste
electrical and electronic
equipment – WEEE).
The directive provides the
framework for an EU-
wide take-back and
Recycling of old devices.
7.Switch off the device. →
Page 34
8th.Close the tap.
9.To empty the remaining water from
the device, turn off the inlet
Loosen the hose and let it drain
out.
51
To Next Page
Loading...
