deTroubleshooting
Disturbance Cause and troubleshooting
“Water supply” display
"Check running" flashes
There is a technical malfunction.
1.Press .
2.Unplug the device or turn off the fuse.
3.Wait at least 2 minutes.
4.Insert the power plug of the device into a socket or
switch on the fuse.
5.Turn on the device.
6.If the problem occurs again:
‒ Press .
‒ Close the faucet.
‒ Unplug the power plug.
‒ Contact customer service →
Page 52
and state
the error code.
Indicators flash Appliance door is not completely closed.
▶ Close the device door.
‒ Arrange dishes so that no parts of the dishes
protrude over the dish rack and prevent the
appliance door from closing safely.
All LEDs light up
or flashing.
Electronics have detected an error.
1.Press the main switch button for about 4 seconds.
The device will reset and restart.
2.If the problem occurs again:
‒ Turn off the device.
‒ Pull out the power plug or switch off the fuse in the
fuse box.
‒ Wait at least 2 minutes.
‒ Turn on the fuse in the fuse box or plug in the
power plug.
‒ Turn on the device.
3.If the problem occurs again:
‒ Contact customer service.
→
"Customer Service", page 52
Leftover food on dishes
dishes.
Dishes are stored too tightly or the basket is
overflowing.
1.Put the dishes away with enough space.
The spray jets must reach the surface of the dishes.
2.Avoid investment locations.
46
To Next Page
Loading...
