815_58300000120057_ara_en_d.doc – 25.05.11 Seite 39 von 60
6.7.2 Installation
► Insert spring clamp (D) into the hinge plate (A)
► Insert hinge plate (A) into the base pan
► Screw hinge plate (A) to the frame and base pan
► Insert hinge lever (B) with the bearing bush (C) into the hinge plate
(A)
► Screw inner door to hinge lever (B)
► Attach tension cord (E) to the hinge lever (B)
► Screw on side panels, angle strip, base panel and outside door.
To Next Page
Loading...
