815_58300000120057_ara_en_d.doc – 25.05.11 Seite 5 von 60
3 OPERATION
3.1 Control panel
The control panel here has maximum features
3.2 LEDs
► Tap turned off
► Active
► End
► Low salt indicator
► Low rinse aid indicator
► Additional functions
3.3 Main switch
The main switch is situated on the left side, separate from the elec-
tronics module.
3.4 Pushbuttons / Additional functions
3.4.1 Half load (optional)
The “Half Load” function reduces water consumption and the running
time. Basically this is achieved by passing over the prerinse and the
second intermediate rinse cycle.
3.4.2 Intensive drying (optional)
If intensive drying is activated, the temperature is increased by 3 K in
the final rinse to improve the drying result.
3.4.3 Reducing time (optional)
The running time of the rinse programme can be reduced with the
“Reduce time” function. To obtain optimum cleaning and drying results
at a reduced running time, the water and energy consumption is in-
creased.
To Next Page
Loading...
