Bosch SSB255 - Commissioning (Single Boiler Application)

6720818454 (2016/02) US SSB
34 | Commissioning (for single boiler application)
5.2 Setting date and time
Press the “menu” button and select “Settings” using the UP/DOWN
button.
Fig. 50
Press the “OK” button and select “General Settings” using the UP/DOWN
button.
Fig. 51
Press the “OK” button and select “Date & Time” using the UP/DOWN
button.
Fig. 52
Press the “OK” button. The display will appear as follow:
Fig. 53
Press the “OK” button to highlight the values. The values can be changed
using the “UP/”DOWN” keys. When the value entered is correct then
press “OK” to insert the next value.
Menu
Domestic Hot Water
Information
Settings
System Test
Settings
General Settings
Boiler Settings
General Settings
Language
Unit type
Date & Time
Other settings
Date & Time
Date: Sun 10/25/2015
Time: 03:02 pm
Time Zone Settings
Display Settings
5 Commissioning (for single boiler application)
Fig. 48
No. Description
1 ON/OFF power switch
2 Reset button
3 Menu button
4 ESC button
5 PC service connection
6 OK button
7 UP/DOWN/LEFT/RIGHT button
8 Display
5.1 Switching the appliance ON/OFF
Switch the appliance ON using the ON/OFF switch. The display will
appear as follow:
04:29 pm
70.0°F
DHW Setpoint
120.0°F
32
1
Fig. 49
In the left of the display is shown the external temperature 1. This value
is only displayed on a single boiler system or with the primary boiler in a
cascade system when the outdoor sensor is installed.
In the right of the display is shown the set setpoint value 2.
In the top right side is displayed the time 3.
To switch off the appliance use the ON/OFF switch.
1
2
8
3
4
5
6
7