Bosch VIA - Page 10

Continuation of the names and functions of each part
(16) REC Button
Use this when recording an MD or when assigning song numbers
during recording,
L\ notice
~
Hyou
are
using
an
MD
that
has
been
protected
against
accelantal
erasure,
Ail
not
go
etorecorang
mase
~ Recording is not possible when using DC power.
“(1 7) 4 (Eject) button
Press to remove the MD.
(18) Microphone volume knob
Use this to adjust the input volume of the microphone
connected to the microphone Input terminal.
49 FM ANT INT/EXT
(FM antenna selector switch)
This is a switch to change the FM antenna.
+ When using the main body FM rod antenna, set it to
the “INT” side,
+ When using an external FM antenna, set it to the
"EXT" side.
Remote controller
{1 POWER button
This button turns the power on and off.
~ | 2 scroll button
When you press this button, the disc title and CD
TEXT recorded on the MD will be scrolled and
displayed once. If you press this button while scrolling,
scrolling will stop. Pressing it again will start
scrolling again,
3 edit button
Press this button to select various edits for
the MD.
a. 4m.set (memory set) button
Press this button to confirm the edited content. In
tuner mode, press to register a broadcast station
5 delete button
Press this button to delete characters when entering
characters.
(6 Numberiletter buttons
+ When playing a CD, use this to specify the song to
play. For example, to specify the third song, press the
<3>
button.
For
the
12th
track,
press
<>10>,
<1>,
<2>
When using TUNER, the preset channel
call. For example, if you want to call up the
station on preset channel 3, press the <3> button.
To call up channel 16, press <>10>, <1>, <6>
* While playing an MD, use this to specify the song to
play.
For
example,
to
specify
the
third
song,
press
the
<3>
button.
For
the
12th
track,
press
<>10>,
<1>,
<2>
* Used when entering characters. When entering
characters using these buttons, see "Inputting letters,
symbols, and numbers" on page 49.