Bosch VIA - Manual Tuning

manual tuning |
(| rReception of FM and AM broadcasting stations with weak radio waves
Automatic
tuning
may
not
be
possible
if
the
station’s
radio
waves
are
weak
or
there
is
a
lot
of
noise.
In
this
case,
use
the
following
manual
tuning
to
tune
in
and
receive
FM
or
AM
broadcasts.
Also,
with
manual
tuning,
everything
becomes
monaural
“This operation is used when receiving a broadcast station that is not stored in Area Fine Memory.
“If you preset (memorize) the stations you often listen to, you can call them up with a single touch. “Calling a preset broadcast station” + page 22
FWAM
6)
O
4
Press
this
button
to
select
FM
or
AM.
or
TUNER
@) id 9 Press this button and set it to “MANUAL TUN.”
TUNING MANUAL.
a) (6) 3 Press this button to tune in to the desired station.
“if the radio waves are weak and there is noise, please adjust the antenna direction and
or
© Installation location,
st |
If you do not want to preset a statior
6 MEMORY 4 Press this button. It will be preset to the lowest
number
of
available
preset
channels.
*Hf
you
hold
down
the
©
MEMORY
button
for
more
than
2
seconds,
it
becomes
area
fine
memory
and
previously
memorized
stations
willbe
deleted.
I
you
press
the
©
MEMORY
button
for
more
than
2
seconds
by
mistake,
press
the
*
(Stop)
button.
“Broadcast
stations
received
manually
will
be
monaural
even
if
preset.
21