Bosch VIA - Page 29

RRS
About the antenna
Reception by rod antenna
The rod antenna of this unit is sufficient for FM reception as long as it is ina
sensitive
location.-Extend
to
full
length
and
adjust
to
angle
for
best
reception.
Reception via external antenna
If you are unable to receive good reception with the rod antenna, connect an external
antenna. If possible, connect an FM dedicated antenna for even better results. To use an
external antenna, connect the antenna cord to the GFM external antenna terminal, and turn the
1@ FM antenna selector switch to the "EXT* position.
Attention
The FM antenna terminal on this unit is generally called an "F-type jack." Please check
this when installing an external antenna etc.
AM loop antenna connection
Assemble
the
AM
loop
antenna
as
shown
in
the
diagram
below,
then
connect
it
to
the
FAM
loop
antenna
terminal
When
installing
the
AM
loop
antenna,
locate
the
location
where
you
can
receive
the
best
reception
while
listening
to
Nic
If you install the AM loop antenna in the following locations, reception will deteriorate.
+ Near the power cord or speakers
+ On top of a VCR or TV, etc.
~
Near
hurescant
hts
20
FM ANT
7300
©~
Ob]: