EasyManua.ls Logo

Boschert EAGLE - Machine Safety, Modifications, and Parts

Default Icon
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
infoak@boschert.de
www.boschert.de
Mattenstraße 1
79541 Lörrach-Hauingen
Tel.: +49 (0) 7621 - 95 93 0
Fax: +49 (0) 7621 - 55 18 4
Changes reserved Version: 01/ 2004
!
!
!
Safety
2.8 Attire
Personnel may not have exposed long hair or wear loose clothing
or jewelery (including rings), as injuries may occur.
Use personal protective gear when necessary or required
by regulations.
2.9 Signs
Observe all instructions at the machine concerning
safety and hazards. Always have complete instructions concerning safety
at the machine!
2.10 Changes in the machine
In case of changes in the machine or its mode of
operation which concern safety, turn machine off
immediately and report the malfunction to the responsible
person. Do not make any changes to the machine without
approval of the supplier. This is also applicable to the
installation and adjustment of safety equipment and valves
as well as to the welding on bearing parts.
Arbitrary changes to the machines that modify anything delivered by BOSCHERT rule out the
liability of the manufacturer for damages resulting from such actions.
The warranty of the manufacturer becomes void under these circumstances.
2.11 Spare parts
Spare parts must conform to the technical requirements
stipulated by the manufacturer. This is always guaranteed
by using original spare parts.
ATTENTION!

Table of Contents

Related product manuals