35
|
ENG
BLUETOOTH CONNECTIONS
DISCONNECT A MOBILE DEVICE
Use the Bose Music app to disconnect your mobile device.
TIP: You can also use Bluetooth settings on your mobile device. Disabling the
Bluetooth feature disconnects all other devices.
RECONNECT A MOBILE DEVICE
Press the Bluetooth button l.
The amplifier tries to connect with the most recently-connected devices.
NOTES:
• Make sure the Bluetooth feature is enabled on your mobile device.
• The device must be within 30 ft (9 m) and powered on.
CONNECT AN ADDITIONAL MOBILE DEVICE
You can store up to eight devices in the amplifier device list.
NOTE: You can play audio from only one device at a time.
1. Press and hold l until the light on the front of the amplifier slowly blinks blue.
2. On your mobile device, select your amplifier from the device list.
NOTE: Make sure the Bluetooth feature is enabled on your mobile device.
CLEAR THE AMPLIFIER DEVICE LIST
1. Press and hold l for 10 seconds until the light on the front of the amplifier blinks
blue 3 times.
2. Delete the amplifier from the Bluetooth list on your device.
All devices are cleared. The amplifier is ready to connect (see page 34).
To Next Page
Loading...
