Bose ControlSpace ESP-88 - Page 86

86
5-3.Gain 24dB
ESP-88 Chassis Settings: Set all channel gains to = 24dB.
(Command on COM = ^BA{1/2}{L/R}24^C)
AMPL(1kHz)
ATS2 Settings
Test Limits
Noise
ATS2 Settings
Test Limits
Perform this test on channels 1 through 8.
5-4.Gain 42dB
ESP Settings: Set all channel gains to = 42dB.
(Command on COM = ^BA{1/2}{L/R}42^C)
AMPL(1kHz)
ATS2 Settings
Test Limits
TEST PROCEDURES
Item Setting
Frequency 1kHz
Amplitude -20.00dBu
B/W <10HZ / FS/2
Filter None
Item Upper limit Lower limit
Level +5.5dBu +2.5dBu
Item Setting
Frequency --
Amplitude Off
B/W 22HZ / 22KHz LPF
Filter “A” Weighting
Item Upper limit Lower limit
Level -77dBu -200dBu
Item Setting
Frequency 1kHz
Amplitude -38.00dBu
B/W <10HZ / FS/2
Filter None
Item Upper limit Lower limit
Level +5.5dBu +2.5dBu