Bose FreeSpace IZA 2120-LZ User Manual (English)

Other manuals for Bose FreeSpace IZA 2120-LZ

Installation And Operating Guide48 pages

Service Manual128 pages

Questions and Answers:

K
Kevin TurnerAug 10, 2025
Why is the sound so low on my Bose FreeSpace IZA 2120-LZ?
- J
  John CollinsAug 10, 2025
  If your Bose Amplifier's sound is low despite being powered on, start by checking that the audio input source's output is at a nominal level. Inspect the cable connections between the source and the amplifier. You can increase the input level using the GAIN controls on the amplifier. Also, ensure the OUTPUT TRIM controls aren't set too low. If a user interface is connected, verify its volume is turned up, and confirm that the loudspeaker taps are correctly set.
S
Sandra SmithAug 15, 2025
What to do if my Bose FreeSpace IZA 2120-LZ Amplifier sound is distorted?
- M
  Michael Holloway Jr.Aug 16, 2025
  If the sound from your Bose Amplifier is distorted, check that the INPUT SIGNAL CLIP LED on the front panel is not red. If the input source signal is clean, then verify that the loudspeakers are not overdriven or damaged.
L
Lauren CarrollAug 22, 2025
How to fix unnatural sound from Bose FreeSpace IZA 2120-LZ?
- S
  smithjustinAug 22, 2025
  If the sound from your Bose Amplifier sounds unnatural, ensure that you have selected the correct EQ preset for the loudspeakers you are using. Also, check the TREBLE and BASS controls located on the front panels.
C
cooperjasonAug 27, 2025
What to do if my Bose Amplifier has power but no sound?
- S
  Shane StevensAug 27, 2025
  If your Bose Amplifier has power but no sound, several factors could be the cause. First, ensure the input source is on and sending a signal, and that all cable connections from the source to the amplifier are secure. Verify that the correct source (A/B) is selected on both the front panel and any connected user interface. Check that the MASTER LEVEL control and the volume control on any connected user interface are turned up. Make sure nothing is plugged into the AUX INPUT, and if anything is connected to the MUTE or PAGE INPUT connectors, verify they haven't been triggered. Finally, confirm that the loudspeakers are properly connected with correct tap settings, the amplifier has adequate ventilation, and the output wiring is correct.
J
Joshua NunezSep 2, 2025
How to troubleshoot a Bose FreeSpace IZA 2120-LZ that has no power?
- T
  Tina VaughnSep 2, 2025
  If your Bose Amplifier is not getting power, first, turn on the power. The blue LED on the front panel should be visible when the power is on. Check to ensure the power cord is properly plugged in. If it is, try plugging the amplifier into a different AC outlet that you know is working correctly.

Bose FreeSpace IZA 2120-LZ Specifications

General

Amplifier Type	Class D
Number of Channels	2
Frequency Response	20 Hz - 20 kHz
THD+N	< 0.3 % (at full rated power)
Input Impedance	10 kΩ
Output Impedance	4-8 Ω
Protection	Thermal, short circuit, overload
Dimensions (H x W x D)	1.75 x 19 x 12.5 in
Total Harmonic Distortion	<0.05%
Operating Voltage	100 - 240 VAC
Power Output	2 x 120W @ 4Ω, 2 x 60W @ 8Ω
Weight	4.1 kg (9.0 lb)