Bose PowerShare PS604D User Manual

16 • English PowerShare PS604D/PS404D • Installation Guide
pro.Bose.com
Remote Volume Control
Remote Volume Control
ControlCenter Digital Zone Controllers
Remotely control the volume of the PS604D and PS404D amplifiers with Bose ControlCenter digital zone
controllers (CC-1D, CC-2D, and CC-3D). Use CC-1D for volume control and use CC-2D and CC-3D for volume
and source control.
A CC-D can be connected to a PS604D/PS404D directly to one of the two Dante ports using a standard
Cat5 cable. CC-D controllers must be connected via a PoE network switch. Configure your CC-D controllers
using ControlSpace Designer. For more information on ControlCenter digital zone controllers, visit pro.Bose.
com.
Switched* Isolated
Secondary D/C C
Primary D/C D
PRIMARYSECONDARY
INPUT
3
4
21
MUTE
2
0
143
OUTPUT ATTENUATION
OUTPUT
0 0 0
321
PowerShare PS604D
Adaptable Power Amplifier
100-240V ~ 50/60HZ
700W MAX
4
*Connect only one Cat 5 to same network
C = ControlSpace Control
D = Dante Audio
CLASS 2 WIRING
12345678
Switcher/router with PoE supported

Bose PowerShare PS604D Specifications

General

Purpose	Performance/stage
On/off switch	Yes
Product color	Black
Connectivity technology	Wired
Amplifier class	A
Output impedance	4 - 8 Ω
Input sensitivity	4 mV
Audio input channels	4.0 channels
Peak power per channel	150 W
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.04 %
Ethernet LAN (RJ-45) ports	1
Speakers connectivity type	-
LED indicators	Link, Network, Power
Maximum current	14.14 A
AC input voltage	100 - 240 V
Power consumption (standby)	14 W
Harmonized System (HS) code	85184000

Weight and Dimensions

Depth	414 mm
Width	483 mm
Height	44 mm
Weight	6400 g