39
|
ENGLISH
BLUETOOTH FUNCTIONS
FUNCTION WHAT TO DO
Answer a second incoming
call and put the current call
on hold
While on a call, press the Bluetooth/Multi-function button l.
You hear a short beep before you hear the second call.
Decline a second incoming
call and stay on current call
While on a call, press and hold l
for one second.
You hear two short beeps indicating the call has been
declined.
Switch between two calls
With two active calls, double-press l.
You hear a short beep before you hear the incoming call.
Redial the last number
When there are no active or incoming calls, double-press l.
Transfer audio to the
mobile device
While on a call, press and hold l for three to four seconds.
The audio is transfered to the mobile phone while the
Bluetooth connection remains active.
Activate voice control
When there are no active or incoming calls, press l.
Mute/unmute a call
While on a call, press H and z simultaneously.
You hear two short beeps indicating the call has been
muted/unmuted.
NOTES: If you are on a call and unplugged from the intercom, the headset powers o
approximately three minutes after the call is ended.
To use the headset when unplugged from the intercom (to listen to audio or
to make or receive calls), Bose recommends to disable the Auto O feature
for uninterrupted functionality. See “Operation Switches” on page 22.
Some functions may not be available for some mobile devices. Refer to your
device owner’s guide for more information.
To Next Page
Loading...
Need help?
General
