Bose Solo 10 - Controlling Volume; Using Auto-Wake Feature

Operation
English - 21
Controlling the volume
On the remote:
•Press+ to increase the volume.
•Press– to decrease the volume.
•Press
to mute or unmute the audio.
Note: To confirm your TV speakers are turned off, see page 15.
Using auto-wake
When the Solo 15/10 system is powered on but not playing audio, the system
powers off after one hour.
To wake the system, press
on the remote.
You can set the Solo 15/10 system to automatically wake whenever a sound signal is
received.
To enable auto-wake:
1. Point the remote at the system.
2. Press and hold
on the remote for 5 seconds.
The system emits three short ascending tones (going up) and the system status
indicator flashes amber.
To disable auto-wake:
1. Point the remote at the system.
2. Press and hold
on the remote for 5 seconds.
The system emits three short descending tones (going down) and the system
status indicator flashes red.
Note: If your devices become out of sync, see “Resyncing your cable/satellite box
and TV” on page 23.