System Setup
English - 9
Step 2: Choosing the type of audio cable
to use
1. On the back of your TV, locate the Audio Out connector panel and note which
type of audio output connectors your TV has.
Use either of these connections for best
audio performance.
Optical digital
audio
Coaxial digital
audio
Analog stereo
audio
Use this connection
if no optical or
coaxial digital audio
outputs are available.
2. Choose the appropriate audio cable for your TV.
Note: Your Solo system may come with several types of audio cables. Only one
audio connection is needed. Choose one cable and set the others aside.
Note: The optical or coaxial cable will provide the best audio performance.
Use the analog cable only if your TV does not have an optical output or a
coaxial output.
Tip: If your TV does not have any audio outputs, you can use the audio outputs
on another device. See “Using alternate connections” on page 17 for other
ways to connect the Solo TV sound system.
To Next Page
Loading...
