18
1. Grill removal
1.1 Remove the three Phillips-head screws
from the bottom baseplate.
1.2 Disconnect the flex cable from J1100 and
remove the two screws securing the grille
assembly.
1.3 Before moving the grille, push down in
the direction of the arrows to release the
centering tab to avoid pulling the tap off.
DISASSEMBLY PROCEDURE
1.3 Lift the grill from the bottom allowing the
tabs to release.
2. Dock Removal
2.1 Remove the 5 Phillips-head screws from
the baseplate to allow the dock frame PCB to
be removed.
To Next Page
Loading...
