Bose SoundDock Portable - Page 27

27
3. Dock Removal
3.1 Once the baffle assembly has been
removed, lift up the four rubber feet. See
Figure 9.
3.2 Remove the four phillips screws.
3.3 Remove the dock assembly being careful
not to damage the two cables that feed into
the main assembly. See Figure 10.
4. Dock Disassembly
4.1 Remove the three Phillips-head screws
that secure the dock. See figure 11.
4.2 Lift the top section of the dock by pulling
up on the dock connector. See figure 12.
4.3 Remove the one screw holding the dock
in place.
4.2 Lift the dock away from the bottom plate.
Note: The dock spring is not secure when
lifting the dock away from the bottom plate.
The spring can be easily lost if not accounted
for.
DISASSEMBLY PROCEDURES
Figure 9
Figure 10
Figure 11
Figure 12