Bose Soundtouch Stereo JC - Connect the speakers

Setting up the System
English - 15
Connect the speakers
What you need:
Acoustimass
®
Module
Speaker
cables
Note: See “Appendix A: Acoustimass
®
connector panel” on page 30 for details.
1. Lay the Acoustimass
®
module on its side. Insert the left (L, gray) speaker
cable plug into the left (L, gray) connector on the Acoustimass
®
module.
2. Insert the other end of the left (L, gray) speaker cable into the left Jewel Cube
®
speaker connector.
3. Insert the right (R, blue) speaker cable plug into the right (R, blue) connector
on the Acoustimass
®
module.
4. Insert the other end of the right (R, blue) speaker cable into the right
Jewel Cube
®
speaker connector.
5. Reconnect the Acoustimass
®
module power cord to AC (mains) power.
Left (L, gray)
Right (R, blue)
Right speaker
Left speaker
Acoustimass
®
module