Bose Soundtouch Stereo JC - Appendix D: Using a Desktop Computer to Connect to the Network

Appendices
English - 33
Appendix D: Using a desktop computer to
connect to the network
If you have a desktop computer, temporarily move the Acoustimass
®
module and
SoundTouch
™
wireless adapter near the computer to set up the W-Fi
®
network con-
nection.
The diagram below shows how to temporarily set up your Acoustimass
®
module
and SoundTouch
™
wireless adapter near your desktop computer.
Once you have the components in place, follow the procedures in this guide to
connect to your network. See “Adding the system to your Wi-Fi network” on page
10. After making the network connection, you can test the system to make sure
everything works.
When you are done, disconnect the Acoustimass
®
module from your computer and
AC (mains) power and permanently install the stereo system. When you reconnect
the Acoustimass
®
module to power, it reconnects to your Wi-Fi
®
network.
See “Placing the speakers” on page 13.
USB cable
Bose
®
link
cable
AC power
cord
Note: Connect the USB cable to the SoundTouch
™
wireless adapter only
when the app instructs you to do so.
Acoustimass
®
module